View XPLAWT-00-0000-000UT60F8_8587884.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

cld-ds97 rev 4d cree ? xlamp ? xp-l leds xp-l high density led xp-l high intensity led pro duc t d escripti on xlamp ? xp-l le ds are available in two versions: high density and high intensity. the xlamp ? xp-l high density (hd) le d is the highest performing discrete in crees high density (hd) class of l eds, delivering the next generation of lumen output and effcacy in the compact 3.45? mm? x? 3.45? mm xp footprint. crees hd l e ds, optimized to deliver maximum lumen output in a small form factor, enable lighting manufacturers to improve the performance of any lighting design, create smaller and less expensive systems, and develop new lighting solutions that were previously not possible. the xlamp xp-l high intensity (hi) l ed is the frst of crees new class of high intensity (hi) l e ds optimized to deliver maximum candela through secondary optics. built on crees breakthrough sc5 technology? platform, the xp-l hi l ed delivers 120 percent more candela than the xp-l hd l e d through the same optic. the xp-l hi l e d leverages the industrys highest single-die performance and a new innovative primary optic design that radically reduces the optical source size to deliver both lumens and intensity. fea tures ? available in white, 70-cri white, 80 -cri white, 85 cri white and 90-cri white ? ansi- compatible chromaticity bins ? binned at 85?c ? maximum drive current: 3000?ma ? low thermal resistance: 2.2?c/w ? wide viewing angle: 125 (xp-l high density), 115 (xp-l high intensity) ? unlimited foor life at 30?oc/85% rh ? refow solderable - jedec j -std-020c ? e lectrically neutral thermal path ? rohs and re ach compliant ? ul ? recognized component ( e349212) ta ble o f cont e nts characteristics ............................................ 2 flux characteristics - xp-l high density ... 3 flux characteristics - xp-l high intensity . 8 relative spectral power distribution ...... 12 relative flux vs. junction temperature .. 12 e lectrical characteristics ......................... 13 relative flux vs. current .......................... 13 relative chromaticity vs. current ............ 14 relative chromaticity vs. temperature ... 15 typical spatial distribution ...................... 16 thermal design ........................................ 16 performance groups C luminous flux ... 17 performance groups C chromaticity ...... 18 crees standard chromaticity regions plotted on the 1931 cie curve ................ 21 crees standard cool white kits plotted on ansi standard chromaticity regions ..................................................... 23 crees standard warm and neutral white kits plotted on ansi standard chromaticity regions .............................. 24 crees standard chromaticity kits .......... 26 bin and order code formats ................... 27 refow soldering characteristics ............ 28 notes ........................................................ 29 mechanical dimensions .......................... 31 tape and reel ........................................... 33 packaging ................................................. 35 product family data sheet copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www. cr ee. c om/x lamp
2 c har ac teristics characteristics unit minimum t ypical maximum thermal resistance, junction to solder point c/w 2.2 viewing angle (fwhm) - xp-l high density degrees 125 viewing angle (fwhm) - xp-l high intensity degrees 115 temperature coeffcient of voltage mv/c -2 e sd withstand voltage (hbm per mil-std-883d) v 8000 dc forward current ma 3000 reverse voltage v -5 forward voltage (@ 1050?ma, 85?c) v 2.95 3.25 le d junction temperature c 150 copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 29). ? cree xlamp xp-l led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25?c are calculated and for reference only. 3 fl ux c har ac teristic s - xp-l high densi ty ( t j = 85?c) the following table provides order codes for xlamp xp-l high density l e ds. for a complete description of the order code nomenclature, please see the bin and order code formats section (page 27). for defnitions of the chromaticity kits, please see the crees standard chromaticity kits section (page 26). chromaticity minimum luminous flux (lm) @ 1050?ma o rder codes kit cc t code flux (lm) @ 85? c flux (lm) @ 25?c* 65 c ri t ypical 70 cri minimum 51 6200 k v6 480 535 xplawt-00-0000-0000v6051 xplawt-00-0000-000bv6051 v5 460 513 xplawt-00-0000-0000v5051 xplawt-00-0000-000bv5051 v4 440 491 xplawt-00-0000-0000v4051 xplawt-00-0000-000bv4051 v3 420 468 xplawt-00-0000-0000v3051 xplawt-00-0000-000bv3051 v2 400 446 xplawt-00-0000-000bv2051 53 6000 k v6 480 535 xplawt-00-0000-0000v6053 xplawt-00-0000-000bv6053 v5 460 513 xplawt-00-0000-0000v5053 xplawt-00-0000-000bv5053 v4 440 491 xplawt-00-0000-0000v4053 xplawt-00-0000-000bv4053 v3 420 468 xplawt-00-0000-0000v3053 xplawt-00-0000-000bv3053 v2 400 446 xplawt-00-0000-000bv2053 50 6200 k v6 480 535 xplawt-00-0000-0000v6050 xplawt-00-0000-000bv6050 v5 460 513 xplawt-00-0000-0000v5050 xplawt-00-0000-000bv5050 v4 440 491 xplawt-00-0000-0000v4050 xplawt-00-0000-000bv4050 v3 420 468 xplawt-00-0000-0000v3050 xplawt-00-0000-000bv3050 v2 400 446 xplawt-00-0000-000bv2050 e1 6500 k v6 480 535 xplawt-00-0000-0000v60e1 xplawt-00-0000-000bv60e1 v5 460 513 xplawt-00-0000-0000v50e1 xplawt-00-0000-000bv50e1 v4 440 491 xplawt-00-0000-0000v40e1 xplawt-00-0000-000bv40e1 v3 420 468 xplawt-00-0000-0000v30e1 xplawt-00-0000-000bv30e1 v2 400 446 xplawt-00-0000-000bv20e1 e2 5700 k v6 480 535 xplawt-00-0000-0000v60e2 xplawt-00-0000-000bv60e2 v5 460 513 xplawt-00-0000-0000v50e2 xplawt-00-0000-000bv50e2 v4 440 491 xplawt-00-0000-0000v40e2 xplawt-00-0000-000bv40e2 v3 420 468 xplawt-00-0000-000bv30e2 v2 400 446 xplawt-00-0000-000bv20e2 copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 29). ? cree xlamp xp-l led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25?c are calculated and for reference only. 4 chromaticity minimum luminous flux (lm) @ 1050?ma o rder codes kit cc t code flux (lm) @ 85? c flux (lm) @ 25?c* 70 cri minimum 75 c ri t ypical 80 cri minimum e3 5000 k v6 480 535 xplawt-00-0000-000bv60e3 v5 460 513 xplawt-00-0000-000bv50e3 xplawt-00-0000-000lv50e3 v4 440 491 xplawt-00-0000-000bv40e3 xplawt-00-0000-000lv40e3 v3 420 468 xplawt-00-0000-000bv30e3 xplawt-00-0000-000lv30e3 v2 400 446 xplawt-00-0000-000bv20e3 xplawt-00-0000-000lv20e3 f4 4750 k v6 480 535 xplawt-00-0000-000bv60f4 v5 460 513 xplawt-00-0000-000bv50f4 xplawt-00-0000-000lv50f4 v4 440 491 xplawt-00-0000-000bv40f4 xplawt-00-0000-000lv40f4 v3 420 468 xplawt-00-0000-000bv30f4 xplawt-00-0000-000lv30f4 v2 400 446 xplawt-00-0000-000bv20f4 xplawt-00-0000-000lv20f4 e4 4500 k v6 480 535 xplawt-00-0000-000bv60e4 v5 460 513 xplawt-00-0000-000bv50e4 xplawt-00-0000-000lv50e4 v4 440 491 xplawt-00-0000-000bv40e4 xplawt-00-0000-000lv40e4 v3 420 468 xplawt-00-0000-000bv30e4 xplawt-00-0000-000lv30e4 v2 400 446 xplawt-00-0000-000bv20e4 xplawt-00-0000-000lv20e4 f5 4250 k v6 480 535 xplawt-00-0000-000bv60f5 v5 460 513 xplawt-00-0000-000bv50f5 xplawt-00-0000-000lv50f5 v4 440 491 xplawt-00-0000-000bv40f5 xplawt-00-0000-000lv40f5 v3 420 468 xplawt-00-0000-000bv30f5 xplawt-00-0000-000lv30f5 v2 400 446 xplawt-00-0000-000bv20f5 xplawt-00-0000-000lv20f5 e5 4000 k v6 480 535 xplawt-00-0000-000bv60e5 v5 460 513 xplawt-00-0000-000bv50e5 v4 440 491 xplawt-00-0000-000bv40e5 xplawt-00-0000-000lv40e5 xplawt-00-0000-000hv40e5 v3 420 468 xplawt-00-0000-000bv30e5 xplawt-00-0000-000lv30e5 xplawt-00-0000-000hv30e5 v2 400 446 xplawt-00-0000-000bv20e5 xplawt-00-0000-000lv20e5 xplawt-00-0000-000hv20e5 u6 380 424 xplawt-00-0000-000bu60e5 xplawt-00-0000-000lu60e5 xplawt-00-0000-000hu60e5 u5 360 401 xplawt-00-0000-000hu50e5 z5 4000 k v4 440 491 xplawt-00-0000-000bv40z5 xplawt-00-0000-000lv40z5 xplawt-00-0000-000hv40z5 v3 420 468 xplawt-00-0000-000bv30z5 xplawt-00-0000-000lv30z5 xplawt-00-0000-000hv30z5 v2 400 446 xplawt-00-0000-000bv20z5 xplawt-00-0000-000lv20z5 xplawt-00-0000-000hv20z5 u6 380 424 xplawt-00-0000-000bu60z5 xplawt-00-0000-000lu60z5 xplawt-00-0000-000hu60z5 u5 360 401 xplawt-00-0000-000hu50z5 fl ux c har ac teristic s - xp-l high densi ty ( t j = 85?c) - continued copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 29). ? cree xlamp xp-l led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25?c are calculated and for reference only. 5 chromaticity minimum luminous flux (lm) @ 1050?ma o rder codes kit cc t code flux (lm) @ 85? c flux (lm) @ 25?c* 70 cri minimum 75 c ri t ypical 80 cri minimum f6 3700 k v4 440 491 xplawt-00-0000-000hv40f6 v3 420 468 xplawt-00-0000-000lv30f6 xplawt-00-0000-000hv30f6 v2 400 446 xplawt-00-0000-000lv20f6 xplawt-00-0000-000hv20f6 u6 380 424 xplawt-00-0000-000lu60f6 xplawt-00-0000-000hu60f6 u5 360 401 xplawt-00-0000-000lu50f6 xplawt-00-0000-000hu50f6 chromaticity minimum luminous flux (lm) @ 1050?ma o rder codes kit cc t code flux (lm) @ 85? c flux (lm) @ 25?c* 80 c ri t ypical 80 cri minimum 85 cri minimum 90 cri minimum e6 3500 k v3 420 468 xplawt-00-0000- 000l v30e6 xplawt-00-0000- 000hv30e6 v2 400 446 xplawt-00-0000- 000l v20e6 xplawt-00-0000- 000hv20e6 u6 380 424 xplawt-00-0000- 000lu60 e6 xplawt-00-0000- 000hu60e6 u5 360 401 xplawt-00-0000- 000lu50 e6 xplawt-00-0000- 000hu50e6 z6 3500 k v2 400 446 xplawt-00-0000- 000l v20z6 xplawt-00-0000- 000hv20z6 u6 380 424 xplawt-00-0000- 000lu60z6 xplawt-00-0000- 000hu60z6 u5 360 401 xplawt-00-0000- 000lu50z6 xplawt-00-0000- 000hu50z6 f7 3250 k v2 400 446 xplawt-00-0000- 000l v20f7 xplawt-00-0000- 000hv20f7 u6 380 424 xplawt-00-0000- 000lu60f7 xplawt-00-0000- 000hu60f7 u5 360 401 xplawt-00-0000- 000lu50f7 xplawt-00-0000- 000hu50f7 u4 340 379 xplawt-00-0000- 000lu40f7 xplawt-00-0000- 000hu40f7 fl ux c har ac teristic s - xp-l high densi ty ( t j = 85?c) - continued copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 29). ? cree xlamp xp-l led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25?c are calculated and for reference only. 6 chromaticity minimum luminous flux (lm) @ 1050?ma o rder codes kit cc t code flux (lm) @ 85? c flux (lm) @ 25?c* 80 c ri t ypical 80 cri minimum 85 cri minimum 90 cri minimum e7 3000 k v2 400 446 xplawt-00-0000- 000l v20e7 xplawt-00-0000- 000hv20e7 u6 380 424 xplawt-00-0000- 000lu60 e7 xplawt-00-0000- 000hu60e7 u5 360 401 xplawt-00-0000- 000lu50 e7 xplawt-00-0000- 000hu50e7 u4 340 379 xplawt-00-0000- 000lu40 e7 xplawt-00-0000- 000hu40e7 u3 320 357 xplawt-00-0000- 000pu30e7 xplawt-00-0000- 000uu30e7 u2 300 334 xplawt-00-0000- 000pu20e7 xplawt-00-0000- 000uu20e7 t6 280 312 xplawt-00-0000- 000pt60e7 xplawt-00-0000- 000ut60e7 z7 3000 k u6 380 424 xplawt-00-0000- 000lu60z7 xplawt-00-0000- 000hu60z7 u5 360 401 xplawt-00-0000- 000lu50z7 xplawt-00-0000- 000hu50z7 u4 340 379 xplawt-00-0000- 000lu40z7 xplawt-00-0000- 000hu40z7 u3 320 357 xplawt-00-0000- 000pu30z7 xplawt-00-0000- 000uu30z7 u2 300 334 xplawt-00-0000- 000pu20z7 xplawt-00-0000- 000uu20z7 t6 280 312 xplawt-00-0000- 000pt60z7 xplawt-00-0000- 000ut60z7 f8 2850 k v2 400 446 xplawt-00-0000- 000l v20f8 u6 380 424 xplawt-00-0000- 000lu60f8 xplawt-00-0000- 000hu60f8 u5 360 401 xplawt-00-0000- 000lu50f8 xplawt-00-0000- 000hu50f8 u4 340 379 xplawt-00-0000- 000lu40f8 xplawt-00-0000- 000hu40f8 u3 320 357 xplawt-00-0000- 000pu30f8 xplawt-00-0000- 000uu30f8 u2 300 334 xplawt-00-0000- 000pu20f8 xplawt-00-0000- 000uu20f8 t6 280 312 xplawt-00-0000- 000pt60f8 xplawt-00-0000- 000ut60f8 t5 260 290 xplawt-00-0000- 000pt50f8 xplawt-00-0000- 000ut50f8 fl ux c har ac teristic s - xp-l high densi ty ( t j = 85?c) - continued copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 29). ? cree xlamp xp-l led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25?c are calculated and for reference only. 7 chromaticity minimum luminous flux (lm) @ 1050?ma o rder codes kit cc t code flux (lm) @ 85? c flux (lm) @ 25?c* 80 c ri t ypical 80 cri minimum 85 cri minimum 90 cri minimum e8 2700 k v2 400 446 xplawt-00-0000- 000l v20e8 u6 380 424 xplawt-00-0000- 000lu60 e8 xplawt-00-0000- 000hu60e8 u5 360 401 xplawt-00-0000- 000lu50 e8 xplawt-00-0000- 000hu50e8 u4 340 379 xplawt-00-0000- 000lu40 e8 xplawt-00-0000- 000hu40e8 u3 320 357 xplawt-00-0000- 000pu30e8 xplawt-00-0000- 000uu30e8 u2 300 334 xplawt-00-0000- 000pu20e8 xplawt-00-0000- 000uu20e8 t6 280 312 xplawt-00-0000- 000pt60e8 xplawt-00-0000- 000ut60e8 t5 260 290 xplawt-00-0000- 000pt50e8 xplawt-00-0000- 000ut50e8 z8 2700 k u6 380 424 xplawt-00-0000- 000lu60z8 u5 360 401 xplawt-00-0000- 000lu50z8 xplawt-00-0000- 000hu50z8 u4 340 379 xplawt-00-0000- 000lu40z8 xplawt-00-0000- 000hu40z8 u3 320 357 u2 300 334 xplawt-00-0000- 000pu20z8 xplawt-00-0000- 000uu20z8 t6 280 312 xplawt-00-0000- 000pt60z8 xplawt-00-0000- 000ut60z8 t5 260 290 xplawt-00-0000- 000pt50z8 xplawt-00-0000- 000ut50z8 fl ux c har ac teristic s - xp-l high densi ty ( t j = 85?c) - continued copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 29). ? cree xlamp xp-l led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25?c are calculated and for reference only. 8 fl ux c har ac teristic s - xp-l high int ensi ty ( t j = 85?c) the following table provides order codes for xlamp xp-l high intensity l e ds. for a complete description of the order code nomenclature, please see the bin and order code formats section (page 27). for defnitions of the chromaticity kits, please see the crees standard chromaticity kits section (page 26). chromaticity minimum luminous flux (lm) @ 1050?ma o rder codes kit cc t code flux (lm) @ 85? c flux (lm) @ 25?c* 65 c ri t ypical 70 cri minimum 51 6200 k v2 400 446 xplawt-h0-0000-0000v2051 xplawt-h0-0000-000bv2051 u6 380 424 xplawt-h0-0000-0000u6051 xplawt-h0-0000-000bu6051 u5 360 401 xplawt-h0-0000-0000u5051 xplawt-h0-0000-000bu5051 53 6000 k v2 400 446 xplawt-h0-0000-0000v2053 xplawt-h0-0000-000bv2053 u6 380 424 xplawt-h0-0000-0000u6053 xplawt-h0-0000-000bu6053 u5 360 401 xplawt-h0-0000-0000u5053 xplawt-h0-0000-000bu5053 50 6200 k v2 400 446 xplawt-h0-0000-0000v2050 xplawt-h0-0000-000bv2050 u6 380 424 xplawt-h0-0000-0000u6050 xplawt-h0-0000-000bu6050 u5 360 401 xplawt-h0-0000-0000u5050 xplawt-h0-0000-000bu5050 e1 6500 k v2 400 446 xplawt-h0-0000-0000v20e1 xplawt-h0-0000-000bv20e1 u6 380 424 xplawt-h0-0000-0000u60e1 xplawt-h0-0000-000bu60e1 u5 360 401 xplawt-h0-0000-0000u50e1 xplawt-h0-0000-000bu50e1 e2 5700 k v2 400 446 xplawt-h0-0000-0000v20e2 xplawt-h0-0000-000bv20e2 u6 380 424 xplawt-h0-0000-0000u60e2 xplawt-h0-0000-000bu60e2 u5 360 401 xplawt-h0-0000-0000u50e2 xplawt-h0-0000-000bu50e2 copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 29). ? cree xlamp xp-l led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25?c are calculated and for reference only. 9 chromaticity minimum luminous flux (lm) @ 1050?ma o rder codes kit cc t code flux (lm) @ 85? c flux (lm) @ 25?c* 70 cri minimum 75 c ri t ypical 80 cri minimum e3 5000 k v2 400 446 xplawt-h0-0000-000bv20e3 xplawt-h0-0000-000lv20e3 u6 380 424 xplawt-h0-0000-000bu60e3 xplawt-h0-0000-000lu60e3 u5 360 401 xplawt-h0-0000-000bu50e3 xplawt-h0-0000-000lu50e3 f4 4750 k v2 400 446 xplawt-h0-0000-000bv20f4 xplawt-h0-0000-000lv20f4 u6 380 424 xplawt-h0-0000-000bu60f4 xplawt-h0-0000-000lu60f4 u5 360 401 xplawt-h0-0000-000bu50f4 xplawt-h0-0000-000lu50f4 e4 4500 k v2 400 446 xplawt-h0-0000-000bv20e4 xplawt-h0-0000-000lv20e4 u6 380 424 xplawt-h0-0000-000bu60e4 xplawt-h0-0000-000lu60e4 u5 360 401 xplawt-h0-0000-000bu50e4 xplawt-h0-0000-000lu50e4 f5 4250 k v2 400 446 xplawt-h0-0000-000bv20f5 xplawt-h0-0000-000lv20f5 u6 380 424 xplawt-h0-0000-000bu60f5 xplawt-h0-0000-000lu60f5 u5 360 401 xplawt-h0-0000-000bu50f5 xplawt-h0-0000-000lu50f5 e5 4000 k v2 400 446 xplawt-h0-0000-000bv20e5 xplawt-h0-0000-000lv20e5 u6 380 424 xplawt-h0-0000-000bu60e5 xplawt-h0-0000-000lu60e5 xplawt-h0-0000-000hu60e5 u5 360 401 xplawt-h0-0000-000bu50e5 xplawt-h0-0000-000lu50e5 xplawt-h0-0000-000hu50e5 u4 340 379 xplawt-h0-0000-000bu40e5 xplawt-h0-0000-000lu40e5 xplawt-h0-0000-000hu40e5 f6 3700 k u5 360 401 xplawt-h0-0000-000lu50f6 xplawt-h0-0000-000hu50f6 u4 340 379 xplawt-h0-0000-000lu40f6 xplawt-h0-0000-000hu40f6 u3 320 357 xplawt-h0-0000-000lu30f6 xplawt-h0-0000-000hu30f6 fl ux c har ac teristic s - xp-l high int ensi ty ( t j = 85?c) - continued copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 29). ? cree xlamp xp-l led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25?c are calculated and for reference only. 10 chromaticity minimum luminous flux (lm) @ 1050?ma o rder codes kit cc t code flux (lm) @ 85? c flux (lm) @ 25?c* 80 c ri t ypical 80 cri minimum 85 cri minimum 90 cri minimum e6 3500 k u5 360 401 xplawt-h0-0000- 000lu50 e6 xplawt-h0-0000- 000hu50e6 u4 340 379 xplawt-h0-0000- 000lu40 e6 xplawt-h0-0000- 000hu40e6 u3 320 357 xplawt-h0-0000- 000lu30 e6 xplawt-h0-0000- 000hu30e6 f7 3250 k u4 340 379 xplawt-h0-0000- 000lu40f7 xplawt-h0-0000- 000hu40f7 u3 320 357 xplawt-h0-0000- 000lu30f7 xplawt-h0-0000- 000hu30f7 u2 300 334 xplawt-h0-0000- 000lu20f7 xplawt-h0-0000- 000hu20f7 e7 3000 k u4 340 379 xplawt-h0-0000- 000lu40 e7 xplawt-h0-0000- 000hu40e7 u3 320 357 xplawt-h0-0000- 000lu30 e7 xplawt-h0-0000- 000hu30e7 u2 300 334 xplawt-h0-0000- 000lu20 e7 xplawt-h0-0000- 000hu20e7 t6 280 312 xplawt-h0-0000- 000pt60e7 xplawt-h0-0000- 000ut60e7 t5 260 290 xplawt-h0-0000- 000pt50e7 xplawt-h0-0000- 000ut50e7 t4 240 268 xplawt-h0-0000- 000pt40e7 xplawt-h0-0000- 000ut40e7 f8 2850 k u4 340 379 xplawt-h0-0000- 000lu40f8 xplawt-h0-0000- 000hu40f8 u3 320 357 xplawt-h0-0000- 000lu30f8 xplawt-h0-0000- 000hu30f8 u2 300 334 xplawt-h0-0000- 000lu20f8 xplawt-h0-0000- 000hu20f8 t6 280 312 xplawt-h0-0000- 000pt60f8 t5 260 290 xplawt-h0-0000- 000pt50f8 xplawt-h0-0000- 000ut50f8 t4 240 268 xplawt-h0-0000- 000pt40f8 xplawt-h0-0000- 000ut40f8 t3 220 245 xplawt-h0-0000- 000pt30f8 fl ux c har ac teristic s - xp-l high int ensi ty ( t j = 85?c) - continued copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 29). ? cree xlamp xp-l led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25?c are calculated and for reference only. 11 chromaticity minimum luminous flux (lm) @ 1050?ma o rder codes kit cc t code flux (lm) @ 85? c flux (lm) @ 25?c* 80 c ri t ypical 80 cri minimum 85 cri minimum 90 cri minimum e8 2700 k u4 340 379 xplawt-h0-0000- 000lu40 e8 u3 320 357 xplawt-h0-0000- 000lu30 e8 xplawt-h0-0000- 000hu30e8 u2 300 334 xplawt-h0-0000- 000lu20 e8 xplawt-h0-0000- 000hu20e8 t6 280 312 xplawt-h0-0000- 000pt60e8 t5 260 290 xplawt-h0-0000- 000pt50e8 xplawt-h0-0000- 000ut50e8 t4 240 268 xplawt-h0-0000- 000pt40e8 xplawt-h0-0000- 000ut40e8 t3 220 245 xplawt-h0-0000- 000pt30e8 fl ux c har ac teristic s - xp-l high int ensi ty ( t j = 85?c) - continued copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
12 rela tive spec tral pow e r distributi on rela tive fl ux vs. jun c ti on tempera ture (i f = 1050? m a) relative spectral power 0 20 40 60 80 100 380 430 480 530 580 630 680 730 780 relative radiant power (%) wavelength (nm) 5000 k - 8300 k cct 3700 k - 5000 k cct 2600 k - 3700 k cct relative flux output vs. junction temperature 0 20 40 60 80 100 120 25 50 75 100 125 150 relative luminous flux (%) junction temperature (oc) copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
13 elec trical c ha r ac teristic s ( t j = 85?c) rela tive fl ux vs. curr e nt ( t j = 85?c) electrical characteristics (tj = 85c) 0 500 1000 1500 2000 2500 3000 2.6 2.8 3.0 3.2 3.4 forward current (ma) forward voltage (v) relative intensity vs. current (tj = 85c) 0 50 100 150 200 250 0 500 1000 1500 2000 2500 3000 relative luminous flux (%) forward current (ma) copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
14 re la tive ch ro ma tic ity vs. curr ent (w arm white) relative chromaticity vs. current, hd - 0.020 - 0.016 - 0.012 - 0.008 - 0.004 0.000 0.004 0.008 0.012 0.016 0.020 0 500 1000 1500 2000 2500 3000 current (ma) ccx ccy xp - l high density relative chromaticity vs. current, hi - 0.020 - 0.016 - 0.012 - 0.008 - 0.004 0.000 0.004 0.008 0.012 0.016 0.020 0 500 1000 1500 2000 2500 3000 current (ma) ccx ccy xp - l high intensity copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
15 re la tive ch ro ma tic ity vs. tempera tur e (w arm white) relative chromaticity vs. temperature, hd - 0.020 - 0.016 - 0.012 - 0.008 - 0.004 0.000 0.004 0.008 0.012 0.016 0.020 25 50 75 100 125 150 tsp ( c) ccx ccy xp - l high density relative chromaticity vs. temperature, hi - 0.020 - 0.016 - 0.012 - 0.008 - 0.004 0.000 0.004 0.008 0.012 0.016 0.020 25 50 75 100 125 150 tsp ( c) ccx ccy xp - l high intensity copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
16 t ypical spa t ial distribution ther mal design the maximum forward current is determined by the thermal resistance between the l e d junction and ambient. it is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. typical spatial radiation pattern 0 20 40 60 80 100 - 90 - 70 - 50 - 30 - 10 10 30 50 70 90 relative luminous intensity (%) angle (o) xp - l high density xp - l high intensity thermal design cool white 0 500 1000 1500 2000 2500 3000 3500 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj - a = 4 c/w rj - a = 7 c/w rj - a = 10 c/w rj - a = 15 c/w copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
17 perf or mance g roup s C lumi nous fl ux xlamp xp-l leds are tested for luminous fux and placed into one of the following luminous - fux groups: g roup code minimum luminous flux (lm) @ 1050?ma maximum luminous flux (lm) @ 1050?ma t3 220 240 t4 240 260 t5 260 280 t6 280 300 u2 300 320 u3 320 340 u4 340 360 u5 360 380 u6 380 400 v2 400 420 v3 420 440 v4 440 460 v5 460 480 v6 480 500 w2 500 520 w3 520 540 copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
18 perf or mance g roup s C chro ma tici ty region x y region x y region x y region x y 0a 0.2950 0.2970 0b 0.2920 0.3060 0c 0.2984 0.3133 0d 0.2984 0.3133 0.2920 0.3060 0.2895 0.3135 0.2962 0.3220 0.3048 0.3207 0.2984 0.3133 0.2962 0.3220 0.3028 0.3304 0.3068 0.3113 0.3009 0.3042 0.2984 0.3133 0.3048 0.3207 0.3009 0.3042 0r 0.2980 0.2880 0s 0.2895 0.3135 0t 0.2962 0.3220 0u 0.3037 0.2937 0.2950 0.2970 0.2870 0.3210 0.2937 0.3312 0.3009 0.3042 0.3009 0.3042 0.2937 0.3312 0.3005 0.3415 0.3068 0.3113 0.3037 0.2937 0.2962 0.3220 0.3028 0.3304 0.3093 0.2993 1a 0.3048 0.3207 1b 0.3028 0.3304 1c 0.3115 0.3391 1d 0.3130 0.3290 0.3130 0.3290 0.3115 0.3391 0.3205 0.3481 0.3213 0.3373 0.3144 0.3186 0.3130 0.3290 0.3213 0.3373 0.3221 0.3261 0.3068 0.3113 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186 1r 0.3068 0.3113 1s 0.3005 0.3415 1t 0.3099 0.3509 1u 0.3144 0.3186 0.3144 0.3186 0.3099 0.3509 0.3196 0.3602 0.3221 0.3261 0.3161 0.3059 0.3115 0.3391 0.3205 0.3481 0.3231 0.3120 0.3093 0.2993 0.3028 0.3304 0.3115 0.3391 0.3161 0.3059 2a 0.3215 0.3350 2b 0.3207 0.3462 2c 0.3290 0.3538 2d 0.3290 0.3417 0.3290 0.3417 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490 0.3290 0.3300 0.3290 0.3417 0.3371 0.3490 0.3366 0.3369 0.3222 0.3243 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300 2r 0.3222 0.3243 2s 0.3196 0.3602 2t 0.3290 0.3690 2u 0.3290 0.3300 0.3290 0.3300 0.3290 0.3690 0.3381 0.3762 0.3366 0.3369 0.3290 0.3180 0.3290 0.3538 0.3376 0.3616 0.3361 0.3245 0.3231 0.3120 0.3207 0.3462 0.3290 0.3538 0.3290 0.3180 3a 0.3371 0.3490 3b 0.3376 0.3616 3r 0.3366 0.3369 3s 0.3381 0.3762 0.3451 0.3554 0.3463 0.3687 0.3440 0.3428 0.3480 0.3840 0.3440 0.3427 0.3451 0.3554 0.3429 0.3307 0.3463 0.3687 0.3366 0.3369 0.3371 0.3490 0.3361 0.3245 0.3376 0.3616 4a 0.3530 0.3597 4b 0.3548 0.3736 4c 0.3641 0.3804 4d 0.3615 0.3659 0.3615 0.3659 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722 0.3590 0.3521 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578 0.3512 0.3465 0.3530 0.3597 0.3615 0.3659 0.3590 0.3521 4r 0.3512 0.3465 4s 0.3571 0.3907 4t 0.3668 0.3957 4u 0.3590 0.3521 0.3590 0.3521 0.3668 0.3957 0.3771 0.4034 0.3670 0.3578 0.3567 0.3389 0.3641 0.3804 0.3736 0.3874 0.3640 0.3440 0.3495 0.3339 0.3548 0.3736 0.3641 0.3804 0.3567 0.3389 copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
perfo rma nc e gr oups C chro ma tic ity ( c ontinued) 19 region x y region x y region x y region x y 5a1 0.3670 0.3578 5a2 0.3686 0.3649 5a3 0.3744 0.3685 5a4 0.3726 0.3612 0.3686 0.3649 0.3702 0.3722 0.3763 0.3760 0.3744 0.3685 0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 0.3804 0.3721 0.3726 0.3612 0.3744 0.3685 0.3804 0.3721 0.3783 0.3646 5b1 0.3702 0.3722 5b2 0.3719 0.3797 5b3 0.3782 0.3837 5b4 0.3763 0.3760 0.3719 0.3797 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837 0.3782 0.3837 0.3802 0.3916 0.3869 0.3958 0.3847 0.3877 0.3763 0.3760 0.3782 0.3837 0.3847 0.3877 0.3825 0.3798 5c1 0.3825 0.3798 5c2 0.3847 0.3877 5c3 0.3912 0.3917 5c4 0.3887 0.3836 0.3847 0.3877 0.3869 0.3958 0.3937 0.4001 0.3912 0.3917 0.3912 0.3917 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958 0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875 5d1 0.3783 0.3646 5d2 0.3804 0.3721 5d3 0.3863 0.3758 5d4 0.3840 0.3681 0.3804 0.3721 0.3825 0.3798 0.3887 0.3836 0.3863 0.3758 0.3863 0.3758 0.3887 0.3836 0.3950 0.3875 0.3924 0.3794 0.3840 0.3681 0.3863 0.3758 0.3924 0.3794 0.3898 0.3716 6a1 0.3889 0.3690 6a2 0.3915 0.3768 6a3 0.3981 0.3800 6a4 0.3953 0.3720 0.3915 0.3768 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800 0.3981 0.3800 0.4010 0.3882 0.4080 0.3916 0.4048 0.3832 0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 0.4017 0.3751 6b1 0.3941 0.3848 6b2 0.3968 0.3930 6b3 0.4040 0.3966 6b4 0.4010 0.3882 0.3968 0.3930 0.3996 0.4015 0.4071 0.4052 0.4040 0.3966 0.4040 0.3966 0.4071 0.4052 0.4146 0.4089 0.4113 0.4001 0.4010 0.3882 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916 6c1 0.4080 0.3916 6c2 0.4113 0.4001 6c3 0.4186 0.4037 6c4 0.4150 0.3950 0.4113 0.4001 0.4146 0.4089 0.4222 0.4127 0.4186 0.4037 0.4186 0.4037 0.4222 0.4127 0.4299 0.4165 0.4259 0.4073 0.4150 0.3950 0.4186 0.4037 0.4259 0.4073 0.4221 0.3984 6d1 0.4017 0.3751 6d2 0.4048 0.3832 6d3 0.4116 0.3865 6d4 0.4082 0.3782 0.4048 0.3832 0.4080 0.3916 0.4150 0.3950 0.4116 0.3865 0.4116 0.3865 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898 0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.4147 0.3814 7a1 0.4147 0.3814 7a2 0.4183 0.3898 7a3 0.4242 0.3919 7a4 0.4203 0.3833 0.4183 0.3898 0.4221 0.3984 0.4281 0.4006 0.4242 0.3919 0.4242 0.3919 0.4281 0.4006 0.4342 0.4028 0.4300 0.3939 0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 0.4259 0.3853 copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
perfo rma nc e gr oups C chro ma tic ity ( c ontinued) 20 region x y region x y region x y region x y 7b1 0.4221 0.3984 7b2 0.4259 0.4073 7b3 0.4322 0.4096 7b4 0.4281 0.4006 0.4259 0.4073 0.4299 0.4165 0.4364 0.4188 0.4322 0.4096 0.4322 0.4096 0.4364 0.4188 0.4430 0.4212 0.4385 0.4119 0.4281 0.4006 0.4322 0.4096 0.4385 0.4119 0.4342 0.4028 7c1 0.4342 0.4028 7c2 0.4385 0.4119 7c3 0.4449 0.4141 7c4 0.4403 0.4049 0.4385 0.4119 0.4430 0.4212 0.4496 0.4236 0.4449 0.4141 0.4449 0.4141 0.4496 0.4236 0.4562 0.4260 0.4513 0.4164 0.4403 0.4049 0.4449 0.4141 0.4513 0.4164 0.4465 0.4071 7d1 0.4259 0.3853 7d2 0.4300 0.3939 7d3 0.4359 0.3960 7d4 0.4316 0.3873 0.4300 0.3939 0.4342 0.4028 0.4403 0.4049 0.4359 0.3960 0.4359 0.3960 0.4403 0.4049 0.4465 0.4071 0.4418 0.3981 0.4316 0.3873 0.4359 0.3960 0.4418 0.3981 0.4373 0.3893 8a1 0.4373 0.3893 8a2 0.4418 0.3981 8a3 0.4475 0.3994 8a4 0.4428 0.3906 0.4418 0.3981 0.4465 0.4071 0.4523 0.4085 0.4475 0.3994 0.4475 0.3994 0.4523 0.4085 0.4582 0.4099 0.4532 0.4008 0.4428 0.3906 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919 8b1 0.4465 0.4071 8b2 0.4513 0.4164 8b3 0.4573 0.4178 8b4 0.4523 0.4085 0.4513 0.4164 0.4562 0.4260 0.4624 0.4274 0.4573 0.4178 0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 0.4634 0.4193 0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4582 0.4099 8c1 0.4582 0.4099 8c2 0.4634 0.4193 8c3 0.4695 0.4207 8c4 0.4641 0.4112 0.4634 0.4193 0.4687 0.4289 0.4750 0.4304 0.4695 0.4207 0.4695 0.4207 0.4750 0.4304 0.4813 0.4319 0.4756 0.4221 0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4700 0.4126 8d1 0.4483 0.3919 8d2 0.4532 0.4008 8d3 0.4589 0.4021 8d4 0.4538 0.3931 0.4532 0.4008 0.4582 0.4099 0.4641 0.4112 0.4589 0.4021 0.4589 0.4021 0.4641 0.4112 0.4700 0.4126 0.4646 0.4034 0.4538 0.3931 0.4589 0.4021 0.4646 0.4034 0.4593 0.3944 copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
21 cree s st an dard chro ma tici ty regi ons pl ott ed on t he 1931 cie curv e ansi cool white neutral white 5000 k 5700 k 6500 k 8000 k 0 a 0 b 0 c 0 d 0 r 0 s 0 t 0 u 1 a 1 b 1 c 1 d 2 a 2 b 2 c 2 d 3 a 3 b 1 r 1 s 1 t 1 u 2 r 2 s 2 t 2 u 3 r 3 s 0 .28 0 .29 0.30 0 .31 0.32 0 .33 0 .34 0.35 0 .36 0 .37 0.38 0 .39 0 .40 0 .28 0 .29 0 .30 0 .31 0.32 0.33 0.34 0.35 0.36 ccy ccx a nsi c78.3 7 7a 3500 k 4000 k 4500 k 5000 k 3 a 3 b 3 c 3 d 4 a 4 b 4 c 4 d 3 r 3 s 3 t 3 u 4 r 4 s 4 t 4 u 5 r 5 s 5 t 5 u 5 a 1 5 a 2 5 a 3 5 a 4 5 b 1 5 b 2 5 b 3 5 b 4 5 c 1 5 c 2 5 c 3 5 c 4 5 d 1 5 d 2 5 d 3 5 d 4 6 a 1 6 a 2 6 a 3 6 a 4 6 b 1 6 b 2 6 b 3 6 b 4 6 c 1 6 c 2 6 c 3 6 c 4 6 d 1 6 d 2 6 d 3 6 d 4 6 r 6 s 6 t 6 u 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 4 1 0 . 4 2 0 . 4 3 0 . 4 4 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 4 1 0 . 4 2 0 . 4 3 0 . 4 4 c c y c c x a ns i c 7 8 . 3 7 7 a copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
22 cree s st an dard chro ma tici ty regi ons pl ott ed on t he 1931 cie curv e - c ontinued ansi neutral white and ansi warm white 2700 k 3000 k 3500 k 4000 k 4500 k 5000 k 3 a 3 b 3 c 3 d 4 a 4 b 4 c 4 d 5 a 1 5 a 2 5 a 3 5 a 4 5 b1 5 b2 5 b3 5b4 5 c 1 5c 2 5c 3 5c 4 5d1 5d2 5d3 5d4 6 a 1 6a 2 6 a 3 6 a 4 6 b1 6 b2 6 b3 6 b4 6 c 1 6 c 2 6 c 3 6 c 4 6d1 6d2 6d3 6d4 7 a 1 7 a 2 7 a 3 7 a 4 7 b1 7 b2 7b3 7b4 7c 1 7c 2 7c 3 7c 4 7d1 7d2 7d3 7d4 8 a 1 8a 2 8 a 3 8a 4 8b1 8 b2 8b3 8 b4 8 c 1 8 c 2 8 c 3 8c 4 8d1 8d2 8d3 8d4 0 .33 0 .34 0.35 0 .36 0.37 0 .38 0.39 0 .40 0.41 0 .42 0.43 0 .44 0 .45 0.46 0.33 0 . 3 4 0.35 0 . 3 6 0.37 0 . 3 8 0.39 0 . 4 0 0.41 0 . 4 2 0 . 4 3 0.44 0 . 4 5 0.46 0 . 4 7 0.48 0 . 4 9 ccy ccx a n si c7 8.3 77a copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
23 cree s st an dard coo l whi te ki ts p l ott ed on a ns i st an dard chro ma tici ty regions 5000 k 5700 k 6500 k 8000 k 0a 0b 0c 0d 0r 0s 0t 0u 1a 1b 1c 1d 2a 2b 2c 2d 3a 3b 1r 1s 1t 1u 2r 2s 2t 2u 3r 3s 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 c c y c c x a ns i c 7 8 . 3 7 7 a 50 5000 k 5700 k 6500 k 8000 k 0a 0b 0c 0d 0r 0s 0t 0u 1a 1b 1c 1d 2a 2b 2c 2d 3a 3b 1r 1s 1t 1u 2r 2s 2t 2u 3r 3s 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 c c y c c x a ns i c 7 8 . 3 7 7 a 51 5000 k 5700 k 6500 k 8000 k 0a 0b 0c 0d 0r 0s 0t 0u 1a 1b 1c 1d 2a 2b 2c 2d 3a 3b 1r 1s 1t 1u 2r 2s 2t 2u 3r 3s 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 c c y c c x a ns i c 7 8 . 3 7 7 a 53 5000 k 5700 k 6500 k 8000 k 0a 0b 0c 0d 0r 0s 0t 0u 1a 1b 1c 1d 2a 2b 2c 2d 3a 3b 1r 1s 1t 1u 2r 2s 2t 2u 3r 3s 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 c c y c c x a ns i c 7 8 . 3 7 7 a e1 5000 k 5700 k 6500 k 8000 k 0a 0b 0c 0d 0r 0s 0t 0u 1a 1b 1c 1d 2a 2b 2c 2d 3a 3b 1r 1s 1t 1u 2r 2s 2t 2u 3r 3s 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 c c y c c x a ns i c 7 8 . 3 7 7 a e2 copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
24 cree s st an dard warm and neutral whi te ki ts p l ott ed on a ns i st an dard chro ma tici ty regi ons 2700 k 3000 k 3500 k 4000 k 4500 k 5000 k 3 a 3 b 3 c 3 d 4 a 4 b 4 c 4 d 5 a 1 5 a 2 5 a 3 5 a 4 5 b 1 5 b 2 5 b 3 5 b 4 5 c 1 5 c 2 5 c 3 5 c 4 5 d 1 5 d 2 5 d 3 5 d 4 6 a 1 6 a 2 6 a 3 6 a 4 6 b 1 6 b 2 6 b 3 6 b 4 6 c 1 6 c 2 6 c 3 6 c 4 6 d 1 6 d 2 6 d 3 6 d 4 7 a 1 7 a 2 7 a 3 7 a 4 7 b 1 7 b 2 7 b 3 7 b 4 7 c 1 7 c 2 7 c 3 7 c 4 7 d 1 7 d 2 7 d 3 7 d 4 8 a 1 8 a 2 8 a 3 8 a 4 8 b 1 8 b 2 8 b 3 8 b 4 8 c 1 8 c 2 8 c 3 8 c 4 8 d 1 8 d 2 8 d 3 8 d 4 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 4 1 0 . 4 2 0 . 4 3 0 . 4 4 0 . 4 5 0 . 4 6 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 4 1 0 . 4 2 0 . 4 3 0 . 4 4 0 . 4 5 0 . 4 6 0 . 4 7 0 . 4 8 0 . 4 9 c c y c c x a ns i c 7 8 . 3 7 7 a e3 e4 e5 e6 e8 e7 2700 k 3000 k 3500 k 4000 k 4500 k 5000 k 3 a 3 b 3 c 3 d 4 a 4 b 4 c 4 d 5 a 1 5 a 2 5 a 3 5 a 4 5 b 1 5 b 2 5 b 3 5 b 4 5 c 1 5 c 2 5 c 3 5 c 4 5 d 1 5 d 2 5 d 3 5 d 4 6 a 1 6 a 2 6 a 3 6 a 4 6 b 1 6 b 2 6 b 3 6 b 4 6 c 1 6 c 2 6 c 3 6 c 4 6 d 1 6 d 2 6 d 3 6 d 4 7 a 1 7 a 2 7 a 3 7 a 4 7 b 1 7 b 2 7 b 3 7 b 4 7 c 1 7 c 2 7 c 3 7 c 4 7 d 1 7 d 2 7 d 3 7 d 4 8 a 1 8 a 2 8 a 3 8 a 4 8 b 1 8 b 2 8 b 3 8 b 4 8 c 1 8 c 2 8 c 3 8 c 4 8 d 1 8 d 2 8 d 3 8 d 4 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 4 1 0 . 4 2 0 . 4 3 0 . 4 4 0 . 4 5 0 . 4 6 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 4 1 0 . 4 2 0 . 4 3 0 . 4 4 0 . 4 5 0 . 4 6 0 . 4 7 0 . 4 8 0 . 4 9 c c y c c x a ns i c 7 8 . 3 7 7 a f4 f6 f7 f5 f8 copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
25 cree s st an dard warm and neutral whi te ki ts p l ott ed on a ns i st an dard chro ma tici ty regi ons - cont inued 2700 k 3000 k 3500 k 4000 k 4500 k 5000 k 3 a 3 b 3 c 3 d 4 a 4 b 4 c 4 d 5 a 1 5 a 2 5 a 3 5 a 4 5 b 1 5 b 2 5 b 3 5 b 4 5 c 1 5 c 2 5 c 3 5 c 4 5 d 1 5 d 2 5 d 3 5 d 4 6 a 1 6 a 2 6 a 3 6 a 4 6 b 1 6 b 2 6 b 3 6 b 4 6 c 1 6 c 2 6 c 3 6 c 4 6 d 1 6 d 2 6 d 3 6 d 4 7 a 1 7 a 2 7 a 3 7 a 4 7 b 1 7 b 2 7 b 3 7 b 4 7 c 1 7 c 2 7 c 3 7 c 4 7 d 1 7 d 2 7 d 3 7 d 4 8 a 1 8 a 2 8 a 3 8 a 4 8 b 1 8 b 2 8 b 3 8 b 4 8 c 1 8 c 2 8 c 3 8 c 4 8 d 1 8 d 2 8 d 3 8 d 4 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 4 1 0 . 4 2 0 . 4 3 0 . 4 4 0 . 4 5 0 . 4 6 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 4 1 0 . 4 2 0 . 4 3 0 . 4 4 0 . 4 5 0 . 4 6 0 . 4 7 0 . 4 8 0 . 4 9 c c y c c x a ns i c 7 8 . 3 7 7 a z6 z7 z5 z8 copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
26 cree s st an dard chro ma tici ty k i ts the following table provides the chromaticity bins associated with chromaticity kits. color cc t kit chromaticity bins cool white 6200 k 51 0a, 0b, 0c, 0d, 0r, 0s, 0t, 0u, 1a, 1b, 1c, 1d, 1r, 1s, 1t, 1u, 2a, 2b, 2c, 2d, 2r, 2s, 2t, 2u, 3a, 3b, 3r, 3s 6000 k 53 1a, 1b, 1c, 1d, 1r, 1s, 1t, 1u, 2a, 2b, 2c, 2d, 2r, 2s, 2t, 3a, 3b, 3s 6200 k 50 1a, 1b, 1c, 1d, 2a, 2b, 2c, 2d 6500 k e1 1a, 1b, 1c, 1d 5700 k e2 2a, 2b, 2c, 2d neutral white 5000 k e3 3a, 3b, 3c, 3d 4750 k f4 3c, 3d, 4a, 4b 4500 k e4 4a, 4b, 4c, 4d 4250 k f5 4c, 4d, 5a1, 5a2, 5a3, 5a4, 5b1, 5b2, 5b3, 5b4 4000 k e5 5a1, 5a2, 5a3, 5a4, 5b1, 5b2, 5b3, 5b4, 5c1, 5c2, 5c3, 5c4, 5d1, 5d2, 5d3, 5d4 4000 k z5 5a3, 5b4, 5c1, 5d2 3750 k f6 5c1, 5c2, 5c3, 5c4, 5d1, 5d2, 5d3, 5d4, 6a1, 6a2, 6a3, 6a4, 6b1, 6b2, 6b3, 6b4 warm white 3500 k e6 6a1, 6a2, 6a3, 6a4, 6b1, 6b2, 6b3, 6b4, 6c1, 6c2, 6c3, 6c4, 6d1, 6d2, 6d3, 6d4 3500 k z6 6a3, 6b4, 6c1, 6d2 3250 k f7 6c1, 6c2, 6c3, 6c4, 6d1, 6d2, 6d3, 6d4, 7a1, 7a2, 7a3, 7a4, 7b1, 7b2, 7b3, 7b4 3000 k e7 7a1, 7a2, 7a3, 7a4, 7b1, 7b2, 7b3, 7b4, 7c1, 7c2, 7c3, 7c4, 7d1, 7d2, 7d3, 7d4 3000 k z7 7a3, 7b4, 7c1, 7d2 2850 k f8 7c1, 7c2, 7c3, 7c4, 7d1, 7d2, 7d3, 7d4, 8a1, 8a2, 8a3, 8a4, 8b1, 8b2, 8b3, 8b4 2700 k e8 8a1, 8a2, 8a3, 8a4, 8b1, 8b2, 8b3, 8b4, 8c1, 8c2, 8c3, 8c4, 8d1, 8d2, 8d3, 8d4 2700 k z8 8a3, 8b4, 8c1, 8d2 copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
27 bi n and o rde r code for ma ts xp-l bin codes and order codes are confgured in the following manner: o rder code bin code sssccc-bd- hhhh - hhhnffnnn series xpl = xp -l class 0 = high density h = high intensity cri specification 0 = cool white b = 7 0 cri minimum l = standard cri h = 8 0 cri minimum p = 8 5 cri minimum u = 9 0 cri minimum chromaticity group luminous flux group internal code color awt = white series xpl = xp - l class 0 = high density h = high intensity luminous flux group cri specification 0 = cool white b = 7 0 cri minimum l = standard cri h = 8 0 cri minimum p = 8 5 cri minimum u = 9 0 cri minimum internal code chromaticity group color awt = white sssccc-b - www - fff-gn-aaaa copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
28 refl ow so lderi ng c har ac teristics in testing, cree has found xlamp xp-l leds to be compatible with jedec j -std- 020c, using the parameters listed below. as a general guideline, cree recommends that users follow the recommended soldering profle provided by the manufacturer of the solder paste used. note that this general guideline may not apply to all pcb designs and confgurations of refow soldering equipment. profile feature lead-free solder average ramp-up rate (ts max to tp) 1.2?c/second preheat: temperature min (ts min ) 120 c preheat: temperature max (ts max ) 170 c preheat: time (ts min to ts max ) 65-150 seconds time maintained above: temperature (t l ) 217 c time maintained above: time (t l ) 45-90 seconds peak/classifcation temperature (tp) 235 - 245 c time within 5?c of actual peak temperature (tp) 20-40 seconds ramp-down rate 1 - 6 c/second time 25?c to peak temperature 4 minutes max. note: all temperatures refer to the topside of the package, measured on the package body surface. ipc/jedec j-std-020c t p t l temperature time t 25?c to peak preheat ts t s t p 25 ramp-down ramp-up critical zone t l to t p ts max ts min copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
29 n otes measurements the luminous fux, radiant power, chromaticity and cri measurements in this document are binning specifcations only and solely represent product measurements as of the date of shipment. these measurements will change over time based on a number of factors that are not within crees control and are not intended or provided as operational specifcations for the products. calculated values are provided for informational purposes only and are not intended as specifcations. p re-release qualifcation t esting please read the le d reliability overview for details of the qualifcation process cree applies to ensure long-term reliability for xlamp leds and details of crees pre-release qualifcation testing for xlamp leds. lumen maintenance cree now uses standardized i e s lm-80-08 and tm-21-11 methods for collecting long-term data and extrapolating le d lumen maintenance. for information on the specifc lm - 80 data sets available for this led, refer to the public lm-80 results document . please read the long-term lumen maintenance application note for more details on crees lumen maintenance testing and forecasting. please read the thermal management application note for details on how thermal design, ambient temperature, and drive current affect the le d junction temperature. moisture sensitivity cree recommends keeping xlamp l e ds in the provided, resealable moisture-barrier packaging (mbp) until immediately prior to soldering. unopened mbps that contain xlamp le ds do not need special storage for moisture sensitivity. once the mbp is opened, xlamp xp-l leds may be stored as msl 1 per jedec j-std-033, meaning they have unlimited foor life in conditions of 30 oc/85% relative humidity (rh). regardless of the storage condition, cree recommends sealing any unsoldered leds in the original mbp. rohs compliance the levels of rohs restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu directive 2011/65/ec (rohs2), as implemented january 2, 2013. rohs declarations for this product can be obtained from your cree representative or from the product documentation sections of www.cree.com . r each compliance re ach substances of very high concern (sv hcs) information is available for this product. since the e uropean chemical agency ( e cha) has published notice of their intent to frequently revise the svhc listing for the foreseeable future, please contact a cree representative to insure you get the most up-to-date r e ach declaration. re ach banned substance information (re ach article 67) is also available upon request. copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
30 ul ? r ecognized component level 4 enclosure consideration. the led package or a portion thereof has been investigated as a fre and electrical enclosure per ansi/ ul 8750. v ision advisory warning: do not look at an exposed lamp in operation. eye injury can result. for more information about l e ds and eye safety, please refer to the led e ye safety application note . n ote s - continued copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
31 m echanical dimensions all measurements are .13?mm unless otherwise indicated. xp-l high density xplawt- 00-xxxx-xxxxxxxxx high density alternate bottom views of the xp-l high density l e d are shown in the diagrams below. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 3.30 .50 .50 3.45 .2 mm 3.45 .2 mm 2.68 r 1.95 1.30 2.30 3.30 .58 3.30 2.30 .50 1.01 3.30 .75 .25 .64 3.30 .50 .50 1.30 3.30 3.30 ref. 3.30 ref. 3.30 ref. 3.30 ref. 3.30 ref. 3.30 ref. 1 / 1 22.000 c 2610-00040 outline drawing xpl 3/26/14 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted primary alternative alternative alternative optical reference optical reference size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 3.30 .50 .50 3.45 .2 mm 3.45 .2 mm 2.68 r 1.95 1.30 2.30 3.30 .58 3.30 2.30 .50 1.01 3.30 .75 .25 .64 3.30 .50 .50 1.30 3.30 3.30 ref. 3.30 ref. 3.30 ref. 3.30 ref. 3.30 ref. 3.30 ref. 1 / 1 22.000 c 2610-00040 outline drawing xpl 3/26/14 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted primary alternative alternative alternative optical reference optical reference size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 3.30 .50 .50 3.45 .2 mm 3.45 .2 mm 2.68 r 1.95 1.30 2.30 3.30 .58 3.30 2.30 .50 1.01 3.30 .75 .25 .64 3.30 .50 .50 1.30 3.30 3.30 ref. 3.30 ref. 3.30 ref. 3.30 ref. 3.30 ref. 3.30 ref. 1 / 1 22.000 c 2610-00040 outline drawing xpl 3/26/14 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted primary alternative alternative alternative optical reference optical reference top view side view bottom view size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 3.30 .50 .50 3.45 .2 mm 3.45 .2 mm 2.68 r 1.95 1.30 2.30 3.30 .58 3.30 2.30 .50 1.01 3.30 .75 .25 .64 3.30 .50 .50 1.30 3.30 3.30 ref. 3.30 ref. 3.30 ref. 3.30 ref. 3.30 ref. 3.30 ref. 1 / 1 22.000 c 2610-00040 outline drawing xpl 3/26/14 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted primary alternative alternative alternative optical reference optical reference size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 3.30 .50 .50 3.45 .2 mm 3.45 .2 mm 2.68 r 1.95 1.30 2.30 3.30 .58 3.30 2.30 .50 1.01 3.30 .75 .25 .64 3.30 .50 .50 1.30 3.30 3.30 ref. 3.30 ref. 3.30 ref. 3.30 ref. 3.30 ref. 3.30 ref. 1 / 1 22.000 c 2610-00040 outline drawing xpl 3/26/14 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted primary alternative alternative alternative optical reference optical reference size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 3.30 .50 .50 3.45 .2 mm 3.45 .2 mm 2.68 r 1.95 1.30 2.30 3.30 .58 3.30 2.30 .50 1.01 3.30 .75 .25 .64 3.30 .50 .50 1.30 3.30 3.30 ref. 3.30 ref. 3.30 ref. 3.30 ref. 3.30 ref. 3.30 ref. 1 / 1 22.000 c 2610-00040 outline drawing xpl 3/26/14 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted primary alternative alternative alternative optical reference optical reference bottom view bottom view bottom view anode copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
32 m echanical dimensi ons - continued xp-l high intensity xplawt- h0-xxxx-xxxxxxxxx high intensity xp-l high density & high intensity top view size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 3.30 .50 1.0 3.45 3.45 3.30 2.30 1.30 .50 3.30 .50 2.30 1.01 .75 .25 .64 3.30 3.30 1.30 .50 .50 3.30 1 / 1 22.000 e 2610-00056 outline drawing xpl 3/13/15 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted optical reference optical reference size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 3.30 .50 1.0 3.45 3.45 3.30 2.30 1.30 .50 3.30 .50 2.30 1.01 .75 .25 .64 3.30 3.30 1.30 .50 .50 3.30 1 / 1 22.000 e 2610-00056 outline drawing xpl 3/13/15 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted optical reference optical reference size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 3.30 .50 1.0 3.45 3.45 3.30 2.30 1.30 .50 3.30 .50 2.30 1.01 .75 .25 .64 3.30 3.30 1.30 .50 .50 3.30 1 / 1 22.000 e 2610-00056 outline drawing xpl 3/13/15 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted optical reference optical reference side view bottom view anode recommended pcb solder pad recommended stencil pattern (hatched area is open) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 3.30 .50 1.0 3.45 3.45 3.30 2.30 1.30 .50 3.30 .50 2.30 1.01 .75 .25 .64 3.30 3.30 1.30 .50 .50 3.30 1 / 1 22.000 e 2610-00056 outline drawing xpl 3/13/15 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted optical reference optical reference size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 3.30 .50 1.0 3.45 3.45 3.30 2.30 1.30 .50 3.30 .50 2.30 1.01 .75 .25 .64 3.30 3.30 1.30 .50 .50 3.30 1 / 1 22.000 e 2610-00056 outline drawing xpl 3/13/15 d. cronin revisons rev description by date app'd recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted optical reference optical reference copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
33 tape and reel all cree carrier tapes conform to e ia-481d, automated component handling systems standard. e xcept as noted, all dimensions in mm [inches] xp-l high density xplawt- 00-xxxx-xxxxxxxxx high density anode side size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 3 4 5 6 6 5 4 3 2 1 a b c phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1 / 1 1.000 a 2402-00040 carrier tape, xpl 5/16/14 d. cronin .30 [.012] t ao 3.60 [.142] 3.00 [.118] ko 3.0 3.0 3.60 [.142] bo 10.25 [.404] e2 p2 2.00 [.079] po 4.00 [.157] ? 1.50 +.10 -.00 ? 1.50 [.059] d1 min 12.00 [.472] nominal 12.30 [.484] max w 1.75 [.069] e1 5.50 [.217]f 8.00 [.315] p pocket size ao - 3.60 mm [.142"] bo - 3.60 mm [.142"] ko - 3.00 mm [.118"] cathode side anode side size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 3 4 5 6 6 5 4 3 2 1 a b c phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1 / 1 1.000 a 2402-00040 carrier tape, xpl 5/16/14 d. cronin .30 [.012] t ao 3.60 [.142] 3.00 [.118] ko 3.0 3.0 3.60 [.142] bo 10.25 [.404] e2 p2 2.00 [.079] po 4.00 [.157] ? 1.50 +.10 -.00 ? 1.50 [.059] d1 min 12.00 [.472] nominal 12.30 [.484] max w 1.75 [.069] e1 5.50 [.217]f 8.00 [.315] p pocket size ao - 3.60 mm [.142"] bo - 3.60 mm [.142"] ko - 3.00 mm [.118"] cathode side anode side size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 3 4 5 6 6 5 4 3 2 1 a b c phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1 / 1 1.000 a 2402-00040 carrier tape, xpl 5/16/14 d. cronin .30 [.012] t ao 3.60 [.142] 3.00 [.118] ko 3.0 3.0 3.60 [.142] bo 10.25 [.404] e2 p2 2.00 [.079] po 4.00 [.157] ? 1.50 +.10 -.00 ? 1.50 [.059] d1 min 12.00 [.472] nominal 12.30 [.484] max w 1.75 [.069] e1 5.50 [.217]f 8.00 [.315] p pocket size ao - 3.60 mm [.142"] bo - 3.60 mm [.142"] ko - 3.00 mm [.118"] cathode side anode side size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 3 4 5 6 6 5 4 3 2 1 a b c phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1 / 1 1.000 a 2402-00040 carrier tape, xpl 5/16/14 d. cronin .30 [.012] t ao 3.60 [.142] 3.00 [.118] ko 3.0 3.0 3.60 [.142] bo 10.25 [.404] e2 p2 2.00 [.079] po 4.00 [.157] ? 1.50 +.10 -.00 ? 1.50 [.059] d1 min 12.00 [.472] nominal 12.30 [.484] max w 1.75 [.069] e1 5.50 [.217]f 8.00 [.315] p pocket size ao - 3.60 mm [.142"] bo - 3.60 mm [.142"] ko - 3.00 mm [.118"] cathode side anode side loaded pockets (500 lamps) leader 400 mm (min.) of empty pockets with at least 100 mm sealed by tape (50 empty pockets min.) trailer 160 mm (min.) of empty pockets sealed with tape (20 pockets min.) start end user feed direction loaded pockets (1,000 lamps) leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) start end cathode side anode side (denoted by + and circle) 160.0 a a b 2.5 .1 section a-a scale 2 : 1 1.5 .1 8.0 .1 4.0 .1 1.75 .10 12.0 .0 + .3 detail b scale 2 : 1 13 mm 7" cover tape pocket tape user feed direction user feed direction copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
34 tape and reel - cont inued xp-l high intensity xplawt- h0-xxxx-xxxxxxxxx high intensity .30 [.012] t ao 3.70 [.146] 1.20 [.047] ko 3.0 3.0 3.70 [.146] bo 10.25 [.404] e2 p2 2.00 [.079] po 4.00 [.157] ? 1.50 +.10 +.0039 -.00[.0591-.0000]do ? 1.50 [.059] d1 min 12.00 [.472] nominal 12.30 [.484] max w 1.75 [.069] e1 5.50 [.217]f 8.00 [.315] p pocket size ao - 3.70 mm [.146"] bo - 3.70 mm [.146"] ko - 1.20 mm [.047"] anode side cathode side .30 [.012] t ao 3.70 [.146] 1.20 [.047] ko 3.0 3.0 3.70 [.146] bo 10.25 [.404] e2 p2 2.00 [.079] po 4.00 [.157] ? 1.50 +.10 +.0039 -.00[.0591-.0000]do ? 1.50 [.059] d1 min 12.00 [.472] nominal 12.30 [.484] max w 1.75 [.069] e1 5.50 [.217]f 8.00 [.315] p pocket size ao - 3.70 mm [.146"] bo - 3.70 mm [.146"] ko - 1.20 mm [.047"] anode side cathode side .30 [.012] t ao 3.70 [.146] 1.20 [.047] ko 3.0 3.0 3.70 [.146] bo 10.25 [.404] e2 p2 2.00 [.079] po 4.00 [.157] ? 1.50 +.10 +.0039 -.00[.0591-.0000]do ? 1.50 [.059] d1 min 12.00 [.472] nominal 12.30 [.484] max w 1.75 [.069] e1 5.50 [.217]f 8.00 [.315] p pocket size ao - 3.70 mm [.146"] bo - 3.70 mm [.146"] ko - 1.20 mm [.047"] anode side cathode side .30 [.012] t ao 3.70 [.146] 1.20 [.047] ko 3.0 3.0 3.70 [.146] bo 10.25 [.404] e2 p2 2.00 [.079] po 4.00 [.157] ? 1.50 +.10 +.0039 -.00[.0591-.0000]do ? 1.50 [.059] d1 min 12.00 [.472] nominal 12.30 [.484] max w 1.75 [.069] e1 5.50 [.217]f 8.00 [.315] p pocket size ao - 3.70 mm [.146"] bo - 3.70 mm [.146"] ko - 1.20 mm [.047"] anode side cathode side anode side loaded pockets (1,000 lamps) leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) start end cathode side anode side (denoted by + and circle) 160.0 a a b 2.5 .1 section a-a scale 2 : 1 1.5 .1 8.0 .1 4.0 .1 1.75 .10 12.0 .0 + .3 detail b scale 2 : 1 13 mm 7" cover tape pocket tape user feed direction user feed direction copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led
35 p acka ging patent label (on bottom of box) label with cree bin code, quantity, reel id label with cree bin code, quantity, reel id label with cree order code, quantity, reel id, po # label with cree order code, quantity, reel id, po # label with cree bin code, quantity, reel id unpackaged reel packaged reel boxed reel cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag p atent label label with customer order code, q t y , r eel i d , po # copyright ? 2014-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo and sc5 technology? are trademarks of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? x p -l led

▲Up To Search▲

Price & Availability of XPLAWT-00-0000-000UT60F8

	To Download XPLAWT-00-0000-000UT60F8 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .